ADVANCED NANO LUBRICANTS TECHNOLOGY

PRODUCT TESTS

PRODUCT SPECIFICATIONS

EXCLUSIVE: NANO ENGINE TERATMENT BOOSTER

SIGNIFICANT FEATURES

1. Exclusive non-degradable oil slipperiness

 

2. Polymer surface science coating

 

3. Nano anti-friction momentum effect

 

4. Double protection to engine component/parts.

 

5. Decarbonizing catalyst rapid & total cleaning

 

6. Heat conduction and cooler running engine

 

7. Reduced engine noise up to 80%

 

8. Reduced engine vibration up to 80%

 

9. Restores engine performance to new, maximum performance level

 

10. Immediate result, reduce noise & vibration in 1 minute after application.

 

11. Extended oil service up to +25,000kms

 

12. A smoother, lighter running engine, minimal throttle pressure, easier manual gear change, lowest noise & vibration.

13. Oil sump cleaning. The effective cleaning and removal of sludge from the engine is evident by comparing the weight of the used oil filter during every oil change. Eventually the oil sump will be super clean and the engine oil will be clean, contaminant free and opaque clear texture.

 

 

ENGINE TEST STAND/ BENCH TEST:

Technical Results produced by University Technology Malaysia – Automotive Development Center (2013) using Nano Engine Treatment Booster as follows;

 

1. Increase on Horsepower: 28.05%

 

2. Increase in Torque: 27.89%

 

3. Reduced fuel consumption: - 28.40%

 

4. Increase Brake Thermal Efficiency by + 33.30%

 

5. Oil sump minimal temperature stability

 

 

6. Reduce emission gases Nitrogen Oxide (NOx) by -6.14%

 

7. Reduce emission gases Carbon Monoxide by  -3%

 

8. Reduced emission gases Hydrocarbon by  -3%

  

TRACK TEST:

Third (3rd) Gear Performance Test

 

 Using Nano Engine Treatment Booster at the ratio of 25ml to every 1 liter engine oil. Exceptional performance for standard commercial cars test results as follows:

 

MANUAL GEARS      

1. All +1,000 cc engines 3rd gear drag will exceed 100kph @ 7,000-8,000rpm.

 

2. All +1,300 cc engines 3rd gear drag will exceed 130kph @ 7,000-8,000rpm.

 

3. All +1,500 cc engines 3rd gear drag will exceed 150kph @ 7,000-8,000rpm.

 

4. All +2,000 cc engines 3rd gear drag will exceed 160kph @ 7,000-8,000rpm.

 

5. Magic: After this test, you can change gears from 1st  to 3rd to 5th Gear easily

 AUTOMATIC GEARS  

6. All Automatic Gear Changes. Every gear from 1st to 3rd +Gears, will at Peak @ Redline 6,000-7,000rpm limited by ECU.

Note* Make sure your timing belt and clutch plates are in good condition.

 

 

 

 

Recent Videos

961 views - 0 comments
963 views - 0 comments